主营产品:铁素体含量检测仪铁素体测试仪铁素体测量仪铁素体测定仪超声波探伤仪色彩色差仪钢筋扫描仪X射线测厚仪紫外线灯高温耦合剂
简体    繁体
联系我们
产品目录
技术文章

高温耦合剂sono600之MSDS

高温耦合剂sono600之MSDS

  MATERIAL SAFETY DATA SHEET简称MSDS,中文意思为材料**数据册或称为物质**说明书。sono600型高温耦合剂是国内广泛使用的一款低温度段工业超声耦合剂,适用温度范围为0-600华摄氏度(-18-315摄氏度),sono600型高温耦合剂的材料特性使之广泛用于300度以下的高温超声探伤和测厚,以下为sono600的MSDS内容,分为16个方面阐述。

Section 1 PRODUCT & COMPANY IDENTIFICATION

Magnaflux 3624 West Lake Ave., Glenview, IL 60025

Product Name: SONO 600

Synonym: Nondestructive Testing (NDT) Ultrasonic Couplant

Date Prepared: June 5, 2012

Emergency Phone: CHEMTREC 1-800-424-9300


SECTION 2 – INGREDIENTS

This material contains refined peanut oil.

Specific ingredients are being withheld as “Trade Secrets”.

This material does not contain any known or suspected carcinogens in concentrations 0.1%.


SECTION 3 – HEALTH HAZARDS

WARNING: CONTAINS REFINED PEANUT OIL

Primary Health Effects

Eyes  None expected

Skin  (Rarely) mild irritation

Inhalation  None expected

Ingestion  None expected


SECTION 4 -- First Aid

Eyes: Flush with water for at least 15 minutes.

Skin: Wash with soap and water.

Inhalation: Not applicable.

Ingestion: Call physician if large quantities involved or if individual experiences allergic reaction.


SECTION 5 – FIRE AND EXPLOSION DATA

Flash Point: 640° F (Sono 600 Fluid), 410° F (Sono 600 Gel) – PMCC

Auto Ignition: 860° F (Fluid), 935° F (Gel)

Extinguishing Media: dry chemical, CO2.

Special Precautions: Do not use water.

Unusual Hazards: None.

NFPA Rating: Health: 0, Fire: 1, Instability: 0


SECTION 6 – ACCIDENTAL RELEASE

Scoop or wipe up excess using oil absorbent material. Sprinkle with traction material if spill not cleaned

immediately. Material is slippery.


SECTION 7 – STORAGE AND HANDLING

Store near room temperature away from sunlight. Use caution and wear appropriate protective clothing when

handling hot material to prevent thermal burns. As with all oil-based materials, do not allow oily rags, etc. to be

stored for long periods of time in poor ventilation, as this may eventually build up enough heat to self ignite.


SECTION 8 – EXPOSURE CONTROLS

Respiratory Protection: Not required.

Ventilation: Not required.

Protective Gloves: May be required if sensitivity exists.

Eye Protection: As required by work environment.

Other Controls: Not required.


SECTION 9 – PHYSICAL DATA

Boiling Point: Not available.

Density: 0.92 g/cc

Vapor Density: Not available.

Vapor Pressure: Not available.

Volatile Organic Compounds: 0 lbs/gal

Percent Solids: <5%

Solubility in water: Insoluble.

Appearance & Odor: Pale yellow oily fluid or grease, odorless.


SECTION 10 – REACTIVITY DATA

Stability: Stable.

Hazardous Polymerization: Will not occur.

Hazardous Decomposition Products: None known.

Incompatibility: None known.


SECTION 11 – TOXICOLOGY INFORMATION

No data.

SECTION 12 – ECOLOGICAL INFORMATION

No data.


SECTION 13 -- DISPOSAL

Follow applicable federal, state, and local regulations.


SECTION 14 – TRANSPORTATION INFORMATION

Domestic regulations: None.

DOT Designation: None.

Hazard Class: None.

ID Number: None.

Packing Group: None.

International Regulations: None known.


SECTION 15 – REGULATORY INFORMATION

TSCA: All ingredients are listed on the TSCA Inventory.


SECTION 16 – ADDITIONAL INFORMATION

HMIS: Health: 0, Flammability: 1, Physical Hazard: 0

Supersedes 5/11  Revised: Section 1


This Material Safety Data Sheet (MSDS) of sono600 high temperature ultrasonic couplant has been prepared in compliance with the Federal OSHA Hazard Communication Standard, 29 CFR 1910.1200. Sonotech believes this information to be reliable and up to date as of the date of this publication, but makes no warranty that it is.

更多高温耦合剂资讯请联系我们。

其他测试仪器:超声波测厚仪、超声波探伤仪铁素体测试仪




苏州圣光仪器有限公司
电话:0512-68050030   传真:0512-68050020  地址:苏州高新区狮山路75号   邮编:215011
苏ICP备11061787号-3  
扫描二维码访问
 

苏公网安备 32050502000400号